Testing The Compressive Strength Of Concrete With The Utilization Of Rice Husk Ash And Palm Fiber
Abstract
Development in the field of structure is currently progressing very rapidly in various field so that concrete is one of the choices as a structural material in building construction, basically concrete is made by mixing portland cement, coarse aggregate, fine aggregate, and water as a binder for these materials. Due to the development of the issue of current resource limitations, the prevention is by innovating the manufacture of concrete using palm fiber waste as an added ingredient from sand and rice husk ash waste as an added ingredient from cement. The purpose of study was to (1) analyze the compressive strength of concrete with variations ini rice husk ash and palm fiber (2) analyze the addition of rice husk ash and palm fiber with different mixture variations that could affect the compressive strength of concrete. The result showed that normal concrete with an average compressive strength of 24.20 MPa and an increase in compressive strength with a mixture of 0.5% palm fiber and 5% rice husk ash with an average strength of 25.90 MPa without using superplasticizer, if the variation mixture exceeding the mixed variation of 0.5% palm fiber and 5% rice husk ash will deacrease
Downloads
References
Hwang, C. L. 2002. “Properties of Cement Paste Containing Rice Husk Ash”, Doctoral Dissertation, Universitas Riau, Riau
Iqbal, R. M., Hayu, G. A. 2020. “Pemanfaatan Abu Sekam Padi 10% Dan Limbah Kaca Sebagai Substitusi Pada Campuran Beton Mutu F’c 23 Mpa”, Jurnal Sondir, Universitas Pertamina, Malang.
Lubis, R., Harahap, M. H. 2015. “Pengaruh Penambahan Serat Ijuk Dan Tempurung Kelapa Terhadap Kuat Tekan Beton”, Jurnal Einstein, Universitas Negeri Medan, Medan.
Prasytia, A. 2021. “Hasil Kekuatan Beton Self-Compacting Concrete Dengan FAS Yang Berbeda Terhadap Pengunaan Abu Sekam Padi Dan Serat Ijuk Dengan Variasi Dari Berat Binder”, Jurnal Ilmiah Mahasiswa Teknik, Universitas Muhammadiyah Sumatera Utara, Medan.
Munandar, I., Savetlana, S., Sugiyanto. 2013. “Kekuatan Tarik Serat Ijuk (Arenga Pinnata Merr)”, Jurnal FEMA, Universitas Lampung, Bandar Lampung.
SNI 03-2834-2000. “Tata Cara Pembuatan Rencana Campuran Beton Normal”,ICS 91.100.30, Badan Standardisasi Nasional.
SNI 1974:2011. “Cara Uji Kuat Tekan Beton Dengan Benda Uji Silinder”. Standar Nasional Indonesia
SNI 7656:2012. “Pemilihan Campuran Untuk Beton Normal, Beton Berat dan Beton Massa”. Standar Nasional Indonesia
SNI 03-1972-1990. “Metode Pengujian Slump Beton”. Standar Nasional Indonesia
Copyright (c) 2023 Muh. Wonua Bhakti Aslon, Irwan Lakawa, Sulaiman Sulaiman, Sitti Hawa

This work is licensed under a Creative Commons Attribution 4.0 International License.